Mato centraFILL standard Mode D'emploi page 8

Application example:
Filling a grease gun
Description:
The centraFILL-deluxe is suitable for filling
grease reservoir containers on central lubrication
systems with commercial greases up to NLGI
Class 2. We expressly exclude any other use.
Delivery specification:
Pumping gear with 2 m PVC outlet hose and
ZSA hydraulic coupling.
Centralising lid
Grease follower piston
Technical Data:
Delivery rate ca. 45 ccm / stroke
Delivery pressure ca. 30 bar
2 m PVC hose, N16
ZSA hydraulic
coupling
8
Retainer hook with peg
Lock nut
Centralising slide
with wing bolt
Ø for grease container
Lid size
10 - 15
20 - 25
50
Description:
The ecoFILL-deluxe is suitable for filling lever
operated grease guns, one handed grease guns and
lubrication units fitted with a grease nipple to DIN
1283, with commercial greases up to NLGI Class 2.
We expressly exclude any other use.
Delivery specification:
Pumping gear with filler pipe for charging nipples to
DIN 1283.
Centralising lid.
Grease follower piston.
Technical Data:
Delivery rate ca. 45 ccm / stroke
Delivery pressure ca. 30 bar
Clamp
Clamping bolt
Centralising slide
with wing bolt
Retainer hook with peg
Centralising lid
cpl. When ordering
give outside
diameter of tub
Grease follower piston.
When ordering give
inside diameter of tub
Grease container
Outside diameter of container
from 215 mm to 285 mm
from 270 mm to 340 mm
from 340 mm to 410 mm
Filler pipe
Clamp
Clamping bolt
Centralising slide
with wing bolt
Retainer hook with peg
Centralising lid
cpl. When ordering
give outside
diameter of tub
Grease follower
piston.
When ordering give
inside diameter of tub