Enable On/Off Duty
This option is available for Selective Call
and Silent Scan modes only. It allows you
to program a specific address as Off Duty,
thereby ignoring that address. By clicking
on the checkbox, the on or off selection
gets enabled in the corresponding channel
tab.
Note: While programming the addressed
as on or off for any channel position, at
least one address must be programmed as
On Duty.
30
English
Push-To-Listen
This option is available for Selective Call
and Silent Scan modes only. When this
option is enabled, after the page alerts, you
must hold down the Reset button to
monitor the incoming message. This option
does not affect the storing voice process.
The Alert Type is set to vibrate by default. It
is compatible with the Off Duty mode (if the
call address is set for either On or Off
Duty).