Publicité
Les langues disponibles
Les langues disponibles
8100-8200
12.09.2003
General safety and installation instructions
Warning!
The following fundamental safety measures must be observed when using
electrical equipment to avoid danger of:
– electric shocks
– danger of fire
– injuries
– The inverter must only be used for the purpose specified by the manufacturer!
– When working on the inverter, always disconnect it from the mains!
– Do not operate the inverter if the housing or cables are damaged!
– The inverter must be positioned and secured safely in order to avoid knock over or
dropping!
– The inverter must be kept in a safe place out of reach of children!
– The inverter may not be operated in damp or wet environment!
–
The inverter may not be used in rooms endangered by explosions!
– Ensure proper ventilation!
– Maintenance and repair must only be carried out by a qualified specialist who is
familiar with the dangers involved and aware of the relevant regulations!
Caution when installing on boats!
Wrong installation of electrical units on boats will lead to corrosion of the boat.
Therefore, please let a (boat) electrician carry out the installation of the inverter.
Safety note
WAECO International does not accept any liability for damages due to the following:
a) assembly errors
b) damage to the system by mechanical effects and overvoltages
c) modifications at the product without the explicit approval of WAECO International
d) Use for any purposes other than those described in the assembly instructions.
230 volts on board
The inverter produces a comparable 230 volts mains voltage out of the battery voltage
even when no 230 volts mains voltage is supplied from outside. The capacities of the
inverters are suitable for electrical consumer units with medium and high capacity
demand. Through the mains priority circuit an automatic switching-over between external
voltage supply and inverter operation is ensured.
8:45 Uhr
Seite 14
All manuals and user guides at all-guides.com
Applications
14
Publicité
Chapitres
