Dust Bag; Paper Bag And Safe Bag For Dust Collection; Longopac Bag For Dust Collection; Replacement Of Dust Bags - Nilfisk T75 Manuel D'instructions

[ NOTE ]
The filter element will be wet after liquids have been
vacuumed.
A wet filter element can quickly become clogged if the
machine is then used to vacuum dry substances.
For this reason, make sure that the filter element is dry or
replace it with another one before using the machine for dry
materials.

Dust Bag

Figure 8
The machine can be equipped with dust collection bag.
In this case, the machine must be equipped with optional
accessories (depressor and grid).
If the bag is not installed or is installed improperly, it could
create ealt risks or people exposed.

Paper Bag and Safe Bag for dust collection

Figure 9
The machine can be equipped with dust collection bag.
In t is case, t e mac ine must e e uipped wit a specific
container and a cap on the side.
I t e a is not properly installed, it could create ealt risks
for people exposed.
[ NOTE ]
The safe bag system is suitable to collect toxic dust to
ensure that the user does not come into contact with the
product.
Longopac ® bag for dust collection
Figure 10
The machine can be equipped with dust collection bag.
In this case, the material is discharged by gravity when the
vacuuming stops. The Longopac® bag can be cut, sealed or
closed to the size required.
I t e a is not properly installed, it could create ealt risks
for people exposed.

Replacement of dust bags

CAUTION!
Before proceeding with these operations, turn off the
machine and remove the plug from the power socket.
CAUTION!
Use only original Nilfisk bags.
CAUTION!
Only use bags suitable for the machine class you are
using.
These operations can only be carried out by trained
and qualified personnel who must wear adequate
clothing, in compliance with the laws in force.
Take care not to raise dust during this operation.
Wear a P3 protective mask.
In case of hazardous and/or harmful dust, use only
the bags recommended by the manufacturer (see
"Recommended spare parts").
The bag must only be disposed of by qualified
personnel and in compliance with the laws in force.
Take care not to raise dust during this operation. Wear
a P3 mask and other protective clothing plus protective
gloves (DPI) suited to the hazardous nature of the dust
collected, refer to the laws in force.
How to replace the Dust Bag
Close the inlet by using the relevant cap (if equipped).
Release the dust container.
Remove the dust bag and close it with a clamp, if
necessary.
Place a new a , takin care to wrap it around t e outer
wall of the dust container.
Set the dust container into the machine again.
How to replace the Paper Bag
Close the inlet by using the relevant cap (if equipped).
Release the dust container.
Remove the bag and close it with the relevant cap (1) as
s own in t e fi ure.
Insert a new a , makin sure t e a inlet is sealed.
Set the dust container into the machine again.
How to replace the Safe Bag
Remove and put the vacuum hose in a safe and dust-free
place.
Close the inlet by using the relevant cap (if equipped).
Release the dust container.
lose t e Sa e a
Close the plastic bag hermetically using the relevant band
(3).
se t e sticky tape 4 to close t e ottom o t e plastic
bag.
Remove the relevant connection (5) of the bag from the
inlet.
Insert a new sa e a , makin sure t e vacuum inlet is
well connected to the bag attachment, to grant the sealing.
rap t e plastic a around t e dust container external
wall.
Place the dust container in the vacuum cleaner.
13
CAUTION!
CAUTION!
Figure 8
Figure 9
Figure 9
y pullin t e uillotine seal
T75
GB
.
C360