Disposal And Recycling; Troubleshooting - Scheppach HS730 Traduction Des Instructions D'origine

14. Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types
of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical
and electronic equipment (WEEE). This product must
be disposed of at a designated collection point.

15. Troubleshooting

In the interests of operational safety, always switch off the saw and remove the mains plug before carrying out main-
tenance work.
Problem
Saw blade gets loose
after turning off the motor
Motor does not start
Wrong rotational direc-
tion
No motor output, turns
off automatically
Burns on the cutting
surface
26 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Possible cause
Fastening nut tightened insufficiently
failure main fuse
extension cable defect
connection to the motor or switch defect
Changed phase
cross section of extension cable is too
low
overload by dull saw blade
Dull saw blade
wrong saw blade
This can occur, for example, by handing it in at an
authorised collecting point for the recycling of waste
electrical and electronic equipment. Improper han-
dling of waste equipment may have negative conse-
quences for the environment and human health due
to potentially hazardous substances that are often
contained in electrical and electronic equipment. By
properly disposing of this product, you are also con-
tributing to the effective use of natural resources.
You can obtain information on collection points for
waste equipment from your municipal administration,
public waste disposal authority, an authorised body
for the disposal of waste electrical and electronic
equipment or your waste disposal company.
Help
Tighten fastening nut, M20 left-handed thread
Check the mains fuse
Replace the extension cable
Have to be checked by an electrician
Change the phase (see fig. 10)
See "electrical connection"
Insert a sharpened saw bladen
Insert a sharpened saw blade
Insert correct saw blade