Kalorik PRO B60A Manuel De L'utilisateur page 13

Breakdown and settlement
Trouble
The machine can't run after
switch on.
Oil leakage.
The raising handle is too
heavy.
The temperature of motor
increases too high and the
speed decreases.
Choose a suitable position
and agitator.
Agitator touches the sides.
PROTECTION OF THE ENVIRONMENT – DIRECTIVE
2002/96/EC
In order to preserve our environment and protect human health, the waste
electrical and electronic equipment should be disposed of in accordance
with specific rules with the implication of both suppliers and users. For this
reason, as indicated by the symbol
packaging, your appliance should not be disposed of as unsorted municipal waste.
The user has the right to bring it to a municipal collection point performing waste
recovery by means of reuse, recycling or use for other applications in accordance
with the directive.
Probable cause
It is not good to touch
electric.
The sealing round damages.
Orbit is erosion.
The up and down pole,
cone gear and hand wheel
axle are dry.
Not enough voltage.
Charge is too heavy.
Working speed is too
fast or it is not suitable
for choosing agitator.
The lube is not good.
Agitator or bowl change
the shape.
on the rating label or on the
- 13 -
Remedy
Check the electric
circuit.
Change the damaged
one.
Clean the damaged one.
Put the lube.
Check the voltage.
Decrease burden.
Choose a suitable position
and agitator.
Put in or change the
lube.
Correct or change the
distortion agitator or
material barrel.