Télécharger Imprimer la page

sebra JUNIOR & GROW Instructions De Montage page 4

Publicité

EN
Congratulations on your new Sebra Bed,
Junior & Grow – The bed that grows with your
YOUR CHILD NEEDS SLEEP TO DEVELOP AND GROW. THE SEBRA BED, JUNIOR & GROW GROWS AND DEVELOPS WITH YOUR CHILD.
FLOWER AND IS MADE FROM FSC™-CERTIFIED WOOD AND OTHER CONTROLLED MATERIALS (LICENCE NUMBER: FSC™ C160110). A GENERATIONAL BED WHICH CAN BE HANDED
DOWN – FROM CHILD TO CHILD, FROM FAMILY TO FAMILY. A PIECE OF DANISH DESIGN HISTORY AND A SAFE AND SECURE PULL-OUT BED CREATED FOR THE GROWING FAMILY AND
FOR JUNIOR.
WE HOPE THAT YOUR FAMILY WILL ENJOY THE SEBRA BED FOR MANY YEARS, AND THAT YOU WILL TAKE GOOD CARE OF IT SO THAT MORE CHILDREN CAN USE IT.
MIA DELA
FOUNDER OF SEBRA
ABOUT THE DESIGN
THE SEBRA BED, JUNIOR & GROW HAS BEEN DESIGNED BY SEBRA AND IS A SEQUEL TO
THE SEBRA BED, BABY & JR.
THE BED CAN BE USED AS A JUNIOR BED, AND AS CHILDREN GROW, THE BED CAN BE
PULLED OUT TO CREATE A STANDARD SINGLE BED IN ADULT SIZE.
THE SEBRA BED, JUNIOR & GROW DESIGN HAS BEEN REGISTERED IN THE EU.
THE SEBRA BED, JUNIOR & GROW IS DESIGNED FOR INDOOR USE.
THE BED IS INTENDED FOR MAX. 125 KG.
BED WEIGHT: 32,8 KG.
TEST AND CONFORMITY:
THE BED HAS BEEN TESTED ACCORDING EN 1725:1998
PRODUCT PARTS AND ASSEMBLY
THIS PRODUCT CONTAINS SMALL PARTS THAT MUST BE KEPT AWAY FROM SMALL
CHILDREN. IF POSSIBLE, SAVE THE PACKAGING IF THE PRODUCT WILL BE STORED FOR
FUTURE USE. WHEN DISPOSING OF PACKAGING, YOU SHOULD COMPLY WITH LOCAL
REGULATIONS.
CHECK THE CONTENTS OF THE PACKAGE BEFORE THE PRODUCT IS ASSEMBLED. A
COMPLETE LIST OF PRODUCT PARTS CAN BE FOUND ON PAGE 22. IN THE UNLIKELY
EVENT THAT SOMETHING IS MISSING, PLEASE CONTACT THE DISTRIBUTOR WHO SOLD
YOU THE PRODUCT.
THIS PRODUCT TAKES APPROX. 35 MIN. TO ASSEMBLE. ASSEMBLY REQUIRES TWO
PEOPLE. TO ASSEMBLE THE PRODUCT, USE THE INCLUDED ALLEN KEY. IN ADDITION, A
PHILLIPS SCREWDRIVER (NOT INCLUDED) IS REQUIRED TO ASSEMBLE THE PRODUCT.
DO NOT USE AN ELECTRIC DRILL/SCREWDRIVER, AS IT MAY DAMAGE OR SCRATCH THE
PRODUCT. IF THE WOODEN DOWELS CANNOT BE PUSHED IN BY HAND, YOU CAN CARE-
FULLY USE A RUBBER MALLET. FOLLOW THE ASSEMBLY INSTRUCTIONS AND FAMILIAR-
ISE YOURSELF WITH THE TWO DIFFERENT BED STAGES (A AND B) BEFORE YOU BEGIN
ASSEMBLY.
MATERIALS
SEE PAGES 38–39 FOR AN OVERVIEW.
THE BED HAS NOT BEEN TREATED WITH, NOR DOES IT CONTAIN, BIOCIDAL PRODUCTS
AS A DISINFECTANT.
ALTHOUGH THE PAINTED/VARNISHED SURFACE IS VERY ROBUST, IT CANNOT BE AVOID-
ED THAT MINOR MARKS, SCRATCHES AND/OR PEELING MAY OCCUR ON THE SURFACE
WITH DAILY USE OVER TIME. MARKS AND MINOR SCRATCHES CAN BE REPAIRED WITH
TOUCH-UP PAINT. PLEASE NOTE THAT IT IS NOT POSSIBLE TO ACHIEVE THE SAME SUR-
FACE FINISH WITH TOUCH-UP PAINT AS WITH THE ORIGINAL SURFACE.
MAINTENANCE GUIDE – CLEANING AND CARE
ALL PRODUCTS ARE AFFECTED BY SUNLIGHT – EVEN THE MOST COLOURFUL AND COL-
OURFAST PRODUCTS CAN FADE. YOU SHOULD THEREFORE KEEP THE PRODUCT AWAY
FROM DIRECT SUNLIGHT.
WOOD IS A STURDY AND LIVING NATURAL MATERIAL. THE STRUCTURE AND COLOURS
WILL CHANGE OVER THE LIFE OF THE PRODUCT DUE TO THE WOOD'S CONTINUOUS
TRANSFORMATION PROCESS. WOOD ADAPTS TO ITS SURROUNDINGS, SO AVOID PLAC-
ING THE PRODUCT IN A ROOM WHERE THE HUMIDITY FLUCTUATES, AND ALWAYS
PROTECT THE PRODUCT FROM STRONG HEAT SOURCES SUCH AS RADIATORS, FIRE-
PLACES, ETC., AS THIS COULD AFFECT THE WOOD OR, IN THE WORST CASE, DRY IT OUT.
EXPOSURE TO DRAMATIC TEMPERATURE VARIATIONS OR HIGH HUMIDITY CAN ALSO
4
DAMAGE THE PRODUCT, AND IT SHOULD THEREFORE BE USED AND STORED WITH THIS
IN MIND.
THE BED CAN BE CLEANED USING WARM SOAPY WATER AND A WRUNG-OUT CLOTH.
ALWAYS USE A SOFT CLOTH TO AVOID SCRATCHES, AND ALWAYS GIVE THE BED A FI-
NAL WIPE WITH A SLIGHTLY DAMP CLOTH. NEVER USE ABRASIVE CLEANERS, ALCOHOL-
BASED AGENTS, BLEACHES, OR SHARP OBJECTS WHEN CLEANING. DUST AND CRUMBS
ON THE BASE PLATE, BETWEEN THE BARS AND IN JOINTS CAN BE GENTLY VACUUMED
AWAY – AVOID SCRATCHING THE BED WITH THE VACUUM CLEANER NOZZLE, CHOOSE A
SUITABLE NOZZLE FOR THE PURPOSE.
THE SEBRA MATTRESS
THE ORIGINAL TWO-PART SEBRA MATTRESS FOR THE SEBRA BED, JUNIOR & GROW
HAS ROUNDED CORNERS, SO IT FITS PERFECTLY IN THE SEBRA BED. THE SEBRA MAT-
TRESS CAN BE PURCHASED SEPARATELY.
WE ADVISE AGAINST HANDING DOWN MATTRESSES FROM CHILD TO CHILD DUE TO HY-
GIENE AND PHYSIOLOGICAL REASONS.
SPARE PARTS
SEBRA OFFERS SPARE PARTS FOR THE SEBRA BED, JUNIOR & GROW. IF PARTS ARE
FOUND TO BE DEFECTIVE AFTER NORMAL PRIVATE USE, SPARE PARTS WILL BE MADE
AVAILABLE FREE OF CHARGE UPON PRESENTATION OF A VALID RECEIPT FOR A PERIOD
OF 5 YEARS FROM THE DATE OF PURCHASE. IF THE PARTS ARE DAMAGED BY MISUSE OR
ARE LOST, SPARE PARTS CAN BE PURCHASED. READ MORE ABOUT HOW AND WHERE
YOU CAN BUY SPARE PARTS AT WWW.SEBRA.DK
PRODUCT WARRANTY TERMS AND CONDITIONS
SEBRA PROVIDES AN EXTENDED PRODUCT WARRANTY FOR THE EU FLOWER ECO-LA-
BELLED BED FOR A PERIOD OF 5 YEARS FROM THE DATE OF PURCHASE.
THE WARRANTY COVERS BREAKAGE OF COMPONENTS AND DAMAGE DURING NORMAL
PRIVATE USE, CAUSED BY DEFECTIVE WORKMANSHIP. WE EMPHASISE THAT NATURAL
VARIATIONS IN THE WOOD CANNOT BE CONSIDERED AS ERRORS OR DEFECTS, AND
SEBRA THEREFORE DOES NOT GUARANTEE COLOURFASTNESS OR MATCHING OF SUR-
FACE COLOURS OR HARDNESS, GRAINS, OR TEXTURES.
IF A COMPLAINT IS JUSTIFIED AND FALLS UNDER THE MENTIONED GUARANTEES, SE-
BRA WILL REPAIR, REPLACE, OR REFUND THE PRODUCT IN QUESTION, DEPENDING
ON THE SPECIFIC CASE. SEBRA ALONE WILL DECIDE WHAT TYPE OF REMEDIAL ACTION
WILL BE TAKEN. IT IS A REQUIREMENT THAT A BATCH NUMBER IS PROVIDED (FOUND
ON THE BACK OF THE ASSEMBLY INSTRUCTIONS AND UNDER ONE OF THE A-PARTS OF
THE BED). TOGETHER WITH A PURCHASE INVOICE WHEN SUBMITTING A WARRANTY
CLAIM.
READ MORE ABOUT THE PRODUCT GUARANTEE AT WWW.SEBRA.DK
THE WARRANTY IS VOIDED BY
THE PRODUCT SHOWING VISIBLE TRACES OF WEAR
SIGNS OF MISUSE
SIGNS OF MISSING/INCORRECT MAINTENANCE ACCORDING TO THE MAINTE-
NANCE GUIDE
THE PRODUCT HAVING SUFFERED DAMAGE, INCORRECT ASSEMBLY, IMPROPER
OPERATION, IMPROPER USE, OR STORAGE, ETC.
THE USE OF THIRD-PARTY MATERIALS ON THE PRODUCT OR CHANGES TO THE
PRODUCT, E.G., NEW PAINT OR VARNISH
DISPOSAL OF THE PRODUCT – RECYCLING AND DISASSEMBLY
THE SEBRA BED, JUNIOR & GROW IS A GENERATIONAL BED. IT IS DESIGNED TO BE
HANDED DOWN. YOU CAN THEREFORE HAND DOWN THE BED TO THE NEXT CHILD IN
THE FAMILY OR GIVE IT TO FRIENDS WHEN YOUR CHILD NO LONGER NEEDS TO USE IT.
THE PRODUCT IS ECO-LABELLED WITH THE EU

Publicité

loading