Thermador DWHD630GCP Guide D'entretien Et D'utilisation page 10

Flip Tines
The racks on select models consist of tines that you can
fold down or raise depending on what you have to load
in the rack.
To fold down:
Grasp the tine near the locking mechanism.
Release from notch.
Push downwards.
Top Rack Height Adjustment (select models)
The top rack can be raised or lowered to accomodate
large items in either rack.
NOTE: Before you push the top rack into the dishwasher,
ensure that the rack height is the same on both sides.
Otherwise,the dishwasher door will not shut and the top
rack spray arm will not connect to the water circuit.
To raise the top rack:
Pull the empty top rack out of the dishwasher until it
stops.
Grasp the top of the rack above the Automatic Height-
Adjustable Top Rack handles and pull it upward until
the handles lock the rack into position (you do not
need to press the handles in order to raise the rack).
To lower the top rack:
Pull the top rack out of the dishwasher until it stops.
Press the Rackmatic Automatic Height- Adjustable
Top Rack handles inward and let the rack drop.
10
Small Item Clips
The small item clips keep lightweight items and plastic
containers from tipping over and illing up with water
during the wash cycle.
The small item clip can be attached to the bottom wire (at
any position) located on both sides of the upper rack.
To attach the small item clip:
Position it on the bottom wire and attach as shown
above.
Push the clip towards the wire until it fastens
securely.