Electrical Hazards; Repairs And Modi Cations - Greenlee G10 Tugger Manuel D'instructions

Electrical Hazards

Disconnect the cable puller from the
power supply before servicing.
This tool must be grounded. In the event of
a malfunction or breakdown, an electrical
ground provides a path of least resistance
for the electric current. This path of least
resistance is intended to reduce the risk of
electric shock to the operator.
This tool's electric cord has a grounding
conductor and a grounding plug as shown.
Do not modify the plug. Connect the plug
to a corresponding GFCI-protected
receptacle that is properly installed and
grounded in accordance with all national
and local codes and ordinances. Do not
use an adapter.
20 Amp / 115 Volt Plug and Grounded Receptacle
Plug
Plug
Repairs and Modifications
Repairs should only be performed by quali ed repair
technicians. Modi cations of any kind to the tool are not
allowed. Unauthorized repairs and modi cations can
result in a tool that is unsafe to operate.
Greenlee Tools, Inc.
Receptacle
Receptacle
8
G10 Tugger™ Portable Cable Puller
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070