Safety Symbols - Greenlee G10 Tugger Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety Symbols

In this operator's manual and on the product, safety
symbols and signal words are used to communicate
important safety information. This section is provided
to improve understanding of these signal words
and symbols.
This is the safety alert symbol. It is used to
alert you to potential personal injury
hazards. Obey all safety messages that
follow this symbol to avoid possible injury
or death.
DANGER
DANGER indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
This symbol means read the operator's
manual carefully before using the
equipment. The operator's manual contains
important information on the safe and
proper operation of the equipment.
This symbol means always wear safety
glasses with side shields or goggles when
handling or using this equipment to reduce
the risk of eye injury.
This symbol indicates the risk of hands,
ngers or other body parts being cut or
severed.
This symbol indicates the risk of
electrical shock.
This symbol means always wear protective
gloves when operating handling or operating
this equipment to reduce the risk of injury.
This symbol indicates a risk of ying debris.
This symbol indicates a risk of
falling objects.
Greenlee Tools, Inc.
G10 Tugger™ Portable Cable Puller
This symbol means never operate this
equipment in a hazardous environment.
This symbol indicates a risk of injury from
rotating parts.
This symbol indicates a risk of crushing from a
rotating capstan.
This symbol indicates a risk of becoming
entangled in rope.
This symbol indicates a risk of unsecured
components moving unexpectedly.
This symbol means the operator must
disconnect the tool from the power supply.
This symbol means the tool must be properly
grounded to reduce the risk of electrical shock
to the operator.
This symbol means the tool must not be used
to lift or lower a load.
3
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

Publicité

Table des Matières
loading

Table des Matières