Grillo CL 620 Mode D'emploi Et Maintenance page 10

Do not travel along gravely ground, or in places covered with burnt ground and always avoid the machine transport
from a place to another, if you have not disconnected the blade.
Avoid the cutting:
a) near residential areas;
b) near passages;
c) near rest areas.
Do not let use the grass-cutter lawn mower by anyone who has not read the manual.
Pay attention not to slip on the slopes, above all when the grass is wet.
For the transport with vehicles different from your machine
IDENTIFICATION AND TECHNICAL ASSISTANCE
S.p.A.
C E S E N A - I TA LY
CL 620
tipo
serie
kg. 80
massa c.a.
anno
TECHNICAL ASSISTANCE
This manual provides instructions for use and basic maintenance of the mower by the user.
For operations that are not described in this manual, contact your Area Dealer.
SPARE PARTS
Only use original spare parts. These are the only parts that ensure safety and interchangeability.
Always quote the machine's serial number and the code number of the part to be replaced when ordering spare
parts.
For engine parts, follow the indications given in the specific manual.
GUARANTEE
The guarantee is provided according to the terms indicated on the guarantee card.
For the engine and the battery, the provisions of the relative manufacturers apply.
RECOMMENDED LIST OF SPARE PARTS TO BE KEPT IN STORE
2 x mowing blades
2 x blade screws
2 x blade screw nuts
1 x set of belts
1 x air filter for engine
1 x accelerator wire
TECHNICAL DATA
ENGINE: BRIGGS & STRATTON QUANTUM XTL 60 190 cc. – 4 stroke petrol, 4,4 kW (6,0 hp), supplied with
cast iron cylinder.
STARTING SYSTEM: pull starter with automatic rewind.
GEAR SYSTEM: hydrostatic transmission.
SPEED: with continuous variation, forward max. 6 km/h, reverse max. 3,5 km/h.
HOURLY CUTTING CAPACITY: 2000 m_/h.
CUTTING HEIGHT: 20-50-80-100 with easy adjustment from the handlebar.
CUTTING WIDTH: 620 mm.
DRIVING WHEELS: with 4 PR, clawed tires 4.00-8, 4 PR.
FRONT WHEEL: with locking-system from the handlebar designed for working on slope and ensuring total
comfort to the driver.
CUTTING DECK: with rear / side discharge.
IDENTIFICATION
The Grillo CL 620 has a label, indicating the machine's serial number.
KW/giri minuto
9