Technical Data; Unpacking; Attachment / Before Starting The Equipment - Scheppach SWP750 Traduction Des Instructions D'origine

Warning! This electric tool generates an
electromagnetic field during operation.
This field can impair active or passive
medical implants under certain condi-
tions. In order to prevent the risk of se-
rious or deadly injuries, we recommend
that persons with medical implants con-
sult with their physician and the manufac-
turer of the medical implant prior to oper-
ating the electric tool.

6. Technical data

Dimensions L x
B x H
Mains connection
Power rating
Max. delivery rate
Max. delivery
head
Immersion Depth
max.
Hose Connection
Max. water tem-
perature
Protection type
Particle size max.
Weight
Subject to technical changes!
26 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
176 x 179 x 326
mm
220 - 240V~
50 Hz
750 W
20000 l/h
8,5 m
7 m
G1 ¼" = 41,9 mm
35 mm
G1" = 33,2 mm
25 mm
35°C
IPX8
30 mm
5,1 kg

7. Unpacking

Open the packaging and remove the de-
vice carefully.
Remove the packaging material as well
as the packaging and transport bracing
(if available). Check that the delivery is
complete.
Check the device and accessory parts for
transport damage. In case of complaints
the dealer must be informed immediate-
ly. Subsequent complaints will not be ac-
cepted.
If possible, store the packaging until the
warranty period has expired. Read the op-
erating manual to make yourself familiar
with the device prior to using it.
Only use original parts for accessories as
well as for wearing and spare parts. Spare
parts are available from your specialized
dealer. Specify our part numbers as well
as the type and year of construction of the
device in your orders.
m ATTENTION
The device and packaging materials
are not toys! Children must not be al-
lowed to play with plastic bags, film
and small parts! There is a risk of
swallowing and suffocation!
8. Attachment / Before
starting the equipment
Fitting the supporting foot (fig. 2)
Fit the respective supporting foot (4/5) as
shown in figure 2.
Connecting the line (fig. 3)
The pump is installed either with a fixed
pipeline or with a flexible hose line.