Table des Matières
Publicité
Operating Instruction
Taking out of use
5
Taking out of use
Machine
for:
with
•
maintenance
•
cleaning
•
inspection
•
repair
•
battery charging
footpump •
remove load
•
set table onto it's
lowest po-sition
•
remove table-
board
6
Inspection
for:
6.1 Inspection before the first use
end of work
The machine is tested by the manu-
facturer before delivery
Machines that are delivered not ready
for use should be inspected by a quali-
�� person in the following aspects ;
lower ma-
chine
•
correct construction
•
correctness for use
6.2 Regular testing
Regular testing of machines at inter-vals
of at the longest one year should be
carried out by a ���� person.
•
use the check list on the following page
•
make a photo copy of the list
•
note top right on the check list
•
Lfd N° (check list number)
•
machine type
•
serial number
•
cross each point when it is in order
•
put the machine back into use only
when each point has been crossed
when completed put the check list into the
appendix of these operating instructions
33
Publicité
Chapitres
Table des Matières
