Safety Facilities; Aperture Restriction In Cylinder Inlet; Lowering Brake Valve; One Way Flow Restriction Valve - Blitz Master Gear 1.0 Mode D'emploi

30
Operating Instruction

Safety Facilities

1.11 Picture Symbols
1 2 3 4
Fig. 1: Safety and Operational hints on the Lift-
ing Truck
kg
kg
2
1
3 4
Fig. 2:
1. Prohibited: Carriage / Transport and
Lifting of personnel!
2. Prohibited: Lifting and Lowering of
loads on sloping surfaces!
3. Prohibited: Transport with raised load!
4. Accumulation of weight forbidden!
5. Prohibited: Staying / Grasping under
an unsecured table!
6. Load must be evenly distributed (sur-
face load)!
7
Fig. 3: You will �� the maximum permissi-ble
load at the appendix of this instruc-tion.
2 Safety Facilities

2.1 Aperture restriction in cylinder inlet

Restricts the oil �� by the rupture of a
hydraulic hose
2.2 Lowering Brake Valve (when on
hand)
5 6
Fixed adjusted limitation of the oil ��
(low-ering speed)

2.3 One Way Flow Restriction Valve

(when on hand)
kg
115257
Adjustable restriction of the oil �� (low
ering speed)
Attention : adjustment is dependent on load !
5 6
2.4 Folding Screen (when on hand)
Prevents grasping under the raised table.
2.5 Securing Device On Wheels
(transportable machines only)
The securing device (brake) prevents the
unintentional movement of the machine.
2.6 Contact Frame (when on hand)
The contact frame stops the lowering of the
table when it comes in contact with an ob-
stacle. Raise the table with the "raise" button
and remove the obstacle then complete the
lowering process.