Power source / min.
recycling time / no.
of flashes (at full
output)
With fresh batteries
(These data may
vary depending on
battery condition)
Ready-light
Flash duration
(approx.)
Mounting foot
lever lock
Dimensions
(W x H x D)
Weight
(without batteries)
Included accessories
• These performance specifications are applicable when fresh batteries are used at
normal temperature (20ºC/68ºF).
• Specifications and design are subject to change without notice.
Oxyride Battery is a registered trademark of Matsushita Electric Industrial Co., Ltd.
Products and brand names are trademarks or registered trademarks of their respective
companies.
Two AA-type penlight batteries (1.5V or lower) of any types:
Batteries
Alkaline-manganese
(1.5V)
Lithium (1.5V)
Oxyride (1.5V)
Ni-MH (2600 mAh)
(rechargeable) (1.2V)
* When firing the Speedlight at full output once every 30
seconds (120 seconds with lithium batteries).
• Lights up when the SB-400 is recharged and ready to fire.
• Blinks to indicate: insufficient light / insufficient battery
power / incompatibility of camera with SB-400 /overheating
1/1300 sec. at full output
Provides secure attachment of SB-400 to camera's accessory
shoe using mount pin to prevent accidental detachment
Approx. 66 x 56.5 x 80mm (2.6 x 2.2 x 3.1 in.)
Approx. 127g (4.5 oz.)
SS-400 Soft Case
Min. recycling
Min. number of flashes*
time (approx.)
/ interval between full
flash output and ready
light on
3.9 sec.
140/3.9-30 sec.
4.2 sec.
250/4.2-30 sec.
3.1 sec.
150/3.1-30 sec.
2.5 sec.
210/2.5-30 sec.
En
23