Basic Operation; Attach The Sb-400 To The Camera; Adjust The Flash Head - Nikon SB-400 Manuel D'utilisation

Basic operation

1

Attach the SB-400 to the camera

En
2

Adjust the flash head

Horizontal
12
90º
75º
60º
1
Make sure the SB-400 and
the camera body are turned
off.
2
Rotate the mounting foot
lock lever to the left, slide
the SB-400's mounting foot
into the camera's accessory
shoe and turn the lock lever
to the right. (illust. A and B)
• In case the mounting foot lock lever
does not stay to the right and a red
line appears (illust. C), the mounting
foot lock lever is not fully rotated to its
right position. Re-attach the SB-400 to
the camera again with the same
process above.
1
Adjust the flash head to the
horizontal position.