Rear Panel - Ramiaudio TEL400 Manuel Utilisateur

REAR PANEL

Made in Europe (Fr) Made in Europe (Fr)
230V 50/60Hz 12W T 250mA L
M
A - RJ11 connector, to connect to the net.
B - RJ11 to connect an handset.
Note: according to the handset, the cord wiring can differ. To face this problem TEL400 offers two connexion types.
 Left connector (STD A) : pins 2 and 3 on RJ 11 ( 2 middle pins)
 Right connector (STD B) : pins 1 and 4 on RJ 11 ( 2 outer pins)
C - Key for mixing A and B hybrids.
 Key down : "ON" is light , the two hybrids are mixed.
 Key up: "OFF" is light, mixing is disabled
D - Hybrid A "SEND" input XLR female connector.
E - Hybrid A " RETURN" output XLR female connector
F - Sub-D 15 female connector for remote control and audio signal hybrid A.
An ordinary male/male 15 pins wire connect TEL 400 to RP200 mixing desk.
G - 15 pins female Sub-D 15 for use with remote control TEL 400R (or withRP2000)
Option
H - Hybrid B Audio signal to be sent, input female XLR
I - Hybrid B received signal from remote location output, male XLR
J - Sub-D 15 female connector for remote control and audio signal A hybrid.
An ordinary male/male 15 pins wire connect Tel 400 to RP200 mixing desk wiring same as A.
K - Waiting audio signal input female XLR.
L - 9 pins female Sub-D (Config + Call Status) .
Various features are set using loops e.g.: automatic hook,
external ring disabling ...
M - CEI power supply connector.
RAMI
PUSH
CONFIG. + STANDBY
CALL STATUS MODULATION REMOTE CONTROL
L K J
+
Return Audio OUT
-
G
PUSH B
TEL 400 R
RETURN SEND REMOTE CONTROL
I H F
Send Audio
IN
-
+
8 1
15 9
Sub-D 15 pins male plug
18
PUSH A
MIX A+B
ON
OFF
RETURN SEND STD A
E D C
3
Lamp 24V/20mA
-
Loop (hold)
Mute ring IN
5
Closed loop
(ON)
Auto hook IN
PRIVATE PHONE LINE
STD B LINE B LINE A
B A
3 pts Female XLR
2
1: Frame ground
3
2: + signal
1
3: - signal
XLR 3 pts Male
1
1: Frame ground
2: + signal
2
3: - signal
Ring indication
OUT
1
9 6
Sub-D
9 pins male plug
TEL400