Lighting - Atag WU50311BM Notice D'utilisation

MAINTENANCE

Lighting

EN 10
Position the activated carbon filter
• Open the front panel and remove the grease filter.
• Centre the carbon filter on the motor frame and turn it to mount it
to the motor frame.
The functioning:
• More noise is produced when a carbon filter is used than when the
cooker hood is used with an exhaust vent.
• A carbon filter functions optimally at a lower motor speed. For this
reason, avoid the intensive speed setting.
• Dispose of the old carbon filter properly, with non-recyclable waste.
This hood is fitted with a light system. This light system has to be
replaced by an authorized technician. Do not attempt to replace it
by yourself.
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.