General Specifications, Engine - Williams DIESELJET Serie Manuel Du Propriétaire

General Specifications
Dieseljet model
Length (OA)*
Beam (OA)*
Height (OA)
Draught
(fully loaded)
Dry weight
Yanmar Engine
Top speed
Fuel
†
Fuel capacity
Seating capacity
Maximum
‡
load capacity
Tube compartments
Design category (CE)
* Dimensions may vary as the inflatable tubes are hand made.
‡
boat trim and loading. See Loading section on page 18.
Engine Specifications
Please refer to the Yanmar Engine Operator's manual for all engine-related information.
Classification
Category C: This craft is designed to
operate in winds up to Beaufort force 6 and
associated wave heights (significant wave
height up to 2 m, see note below). Such
conditions may be encountered in exposed
inland waters, in estuaries and in coastal
waters in moderate weather conditions.
This boat complies with ISO 6185-3. The
CE plate is located in the starboard rear
footwell. The CE plate is the certification to
445 505
4.45 m
5.03 m
2.01 m
2.01 m
1.38 m
1.38 m
0.42 m
0.42 m
840 kg
880 kg
4JH110 4JH110
(110 mhp) (110 mhp)
40 mph/ 40 mph/
64 kph 64 kph
Diesel Diesel
68 litres 68 litres
7 8
555 kg 725 kg
5 5
C C
565
5.71 m
2.39 m
1.49 m
0.50 m
1170 kg
4LV
(150 mhp/195 mhp)
40mph/64kph
44mph/71kph
Diesel
100 litres
9
800 kg
5
C
†
Not all fuel tank capacity may be available, due to
European Directive 94/25/CE. This boat is
also compliant with US Coastguard and ABYC
regulations.
NOTE The significant wave height is the mean
height of the highest one-third of the waves,
which approximately corresponds to the wave
height estimated by an experienced observer.
Some waves will be double this height.
625
6.32 m
2.39 m
1.53 m
0.50 m
1410 kg
4LV
(195 mhp/230 mhp)
44mph/71kph
46mph/74kph
Diesel
140 litres
11
900 kg
5
C
11