Publicité
Les langues disponibles
Les langues disponibles
8.1
GENERAL MAINTENANCE
•
Before each use, examine the machine for damaged,
missing, or loose parts such as screws, nuts, bolts and
caps.
•
Tighten correctly all the fasteners and caps.
•
Clean the remaining snow on the machine with a brush.
8.2
REPLACE THE SCRAPER
24
24
WARNING
Use only approved replacement scrapers.
WARNING
Wear heavy gloves or wind cloth around the blade when
you touch the blade.
1. Remove the screws (24) from each side plate.
2. Remove the mounting screws (25) and spacers and
discard the old scraper.
3. Install the new scraper.
4. Reinstall the mounting screws (25) and spacers and
tighten them.
8.3
REPLACE THE IMPELLER
WARNING
Use only approved replacement scrapers.
English
1. Remove the 5 screws (24) and side wear pad (26) that
2. Remove the nut (27).
25
3. Remove the 5 screws (24) and side wear pad(26) that
4. Remove the belt (28).
11
secure the right side cover (31).
secure the left side cover (31).
EN
Publicité
