Thermador Professional PRO-GRAND Serie Instructions D'installation page 7

Do not install the Models PD304 and PD48 ranges such that the
oven door is flush with the cabinet face. A flush installation could
result in damage to the cabinets due to exposure to high heat.
As defined in the "National
Fuel Gas Code" (ANSI
Z223.1, Latest Edition).
FIG. 1 Cabinet Clearances
30" Min. to 36" Max. bottom of
overhead Hood to cooking
surface (36" if hood contains
combustible materials
18" Min.
•
*35-3/8" Min. Range Height
with Leveling Legs fully
retracted
*36-3/4" Max. Range Height
with Leveling Legs fully
extended.
Step 2: Cabinet Preparation
CAUTION:
For 30" Ranges
For 36" Ranges
For 48" Ranges
Min. Distance Between Overhead
Cabinets of Combustible Material
30" Range – 30"
36" Range – 36"
48" Range – 48"
)
For Electrical and Gas Supply Zone,
see Figure 3A. Zone size and position
differ according to the model.
as defined in the "National Fuel Gas Code" (ANSI Z223.1,
Latest Edition). *The range height is adjustable. The level of the
range top must be at the same level or above the countertop level.
}
30" or 36" Wide Hood
42" or 48" for Island
}
36" or 42" Wide Hood
42" or 48" for Island
}
48" or 60" Wide Hood
48", 54" or 60" for Island
13" Max. }
Cabinet
Depth
combustible
Range width
30", 36" or 48"
material
(both sides)
Cooking
Surface
5
See Figs.
CAUTION:
3" Min. to
2A, and 2B. 36"
Min. to combustible
side wall
material ,
,
from cooking
surface