Husqvarna 27012912044 Mode D'emploi page 6

6

- Remove screws from both sides.

- Take off footrest on both sides.

- Position left brace (included) and left footrest

- Mount upper screw (included), but do not tighten yet.

- Mount washer and screw
screws to 20 Nm.
NOTE

Washer is located behind the footrest.

- Mount screw (included) and tighten to 12 Nm.

- Position right brace (included) and right footrest

- Mount upper screw (included), but do not tighten yet.

- Mount washer and screw
screws to 20 Nm.
NOTE

Washer is located behind the footrest.

- Mount screw (included) and tighten to 12 Nm.
Final steps
- Close fi ller cap (see Owner's Manual).
- Mount the seat (see Owner's Manual).
Due to the changes in vehicle handling characteristics, acceler-
ate gradually to the permitted maximum speed of 130 km/h!
Ensure that the payload never exceeds 3 kg per case!
Make sure that all accessories and luggage items are securely
fastened. Check this regularly!

.

(both included), and tighten both

.

(both included), and tighten both