Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Display/Error
RotoForce-1
OVERLOAD
PAUSE/
OVERLOAD
PAUSE/
NO AIR

Lupo

Bad or missing
dosing
Lubricant leaking
below the bottle
Preparation Error
Unplane specimens
Japanese Texts
RotoForce-1
Instruction Manual

4. Trouble-shooting

Cause
RotoForce-1 is stopped due to overloading of
the motor.
The motor has cooled down after overloading
and RotoForce-1 is ready for use.
Air pressure too low.
Dosing nozzle clogged
The bottle has not been fastened correctly
Cause
Abrasive too coarse
RotoForce-1 has the possibility of showing the
screen texts in Japanese. When choosing a
European language in the LANGUAGE menu,
you might accidentally press m MENU at the
Japanese option.
Action
Wait for the motor to cool down and the
PAUSE/OVERLOAD message will appear
on the display.
Restart RotoForce-1.
Supply correct air pressure and restart
Clean the nozzle with alcohol
Fasten tightly.
Remember to hold back the socket cap
itself to avoid damage to the bottom gasket
Action
See section Grinding.
To return to English, German or French
texts, just follow this procedure:
o
n Press STOP
.
m
n Press MENU
two times.
L
n Press SELECT
language you prefer.
o
n Press STOP
.
until you reach the
19

Publicité

Table des Matières
loading

Table des Matières