Quax CUBIC 01 02 46 Serie Manuel page 17

Parc enfant avec fond réglable

Les langues disponibles

CUBIC

01 02 46xx

4. Assembling the bed

Step 1 : Use parts A, B and the 8 large bolts (E)

Place the 8 large bolts (E) in the provided openings on the upperside and the bottom of the legstructures

(A). Insert the sides (B) with the holes on the bars faced inwards the box, between the legstructures and

pull the bolts one by one backwards and push them back into the openings of the sides. The sides are

now hanging free between the legs.

Step 2 : Use the 8 cylindrical dowels M6 (F) and the parts of step1

Insert one by one the cylindrical dowels (F) in the provided openings of the sides (B). Pay attention that

the opening in the dowel faces the bolt. Tighten slightly with the hexagonal key (H). Repeat this action for

the remaining 7 bolts.

Step 3 : Use the parts of step 2, the bottom J, 4 crochet hooks (D), 4 spacers (G), 4 short bolts (C) and

the 4 nuts M6 (K)

Place the crochet hooks (D) in the provided openings on the legs (A). Pay attention that the four of these

are on the same height of one of the possible positions for the base. Insert the base (J) into the playpen

and let it rest on the crochet hooks. Push a short bolt (C) through an opening of the base and the under-

lying crochet hook, place one spacer (G), a nut (K) and thighten slightly. Repeat for the remaining three

bolts. Finally tighten.

Step 4 : FInally fasten all large bolts ﬁ rmly (E - step 2)

Step 5 : Changing the position of the base

Redo all actions of step 3 in reversed order. Replace the crochet hooks on a different level and repeat

step 3.

Kinderpark met verstelbare bodem

Laufgitter mit verstelbarer Boden

Parc enfant avec fond réglable

Playpen with adjustable bottom

Quax

First dreams

First steps