Hoover airLift UH70210 Mode D'emploi page 13

Keep your Air Lift
1 2
Press the dirt cup
release button and
pivot cup out.
WARNING
!
To reduce the risk of personal injury-Unplug
before cleaning or servicing. Do not use
vacuum without dirt cup or filters in place.
See us do it:
Hoover.com/video-instruction-guide
running properly:
™
3
Pull release tab to Press latches on
open filter cover side of filter to
and pivot forward release. Tap out
to remove. dirt and debris.
IMPORTANT:
!
DO NOT RINSE OR WASH
THE HEPA FILTER CARTRIDGE.
filter made with HEPA media:
4
Replace filter into
position until it clicks.
Replace filter cover by
placing bottom cover
into slots and pivot
forward until it clicks.
What HEPA Filter to Buy
When used and maintained properly, your Filter
should not need replacement within the warranty
period. If desired, additional filter is available.
Ask for Hoover Part No. 440008154.
®
5
Place the dirt cup
back in, bottom
first until it clicks
into place.
10