Put On The Hearing Aid; Caring For Your Hearing Aid - oticon Opn 1 miniRITE Mode D'emploi

Put on the hearing aid

Step 1 Step 2
Place the hearing Hold the bend of
aid behind your ear. the speaker wire
between your
The speaker should thumb and index
always be used finger. The ear-
with an earpiece piece should point
attached. Use only towards opening of
parts designed for the ear canal.
your hearing aid.
18 About Startup Handling Options Tinnitus Warnings More info
Step 3
Ear grip
(optional)
Gently push the
earpiece into your ear
canal until the
speaker wire sits
close to your head.
If the speaker has an
ear grip, place it in the
ear so it follows the
contour of the ear.

Caring for your hearing aid

When handling your hearing aid, hold
it over a soft surface to avoid damage
if you drop it.
Clean the microphone openings
Carefully brush any debris away
from the openings. Gently brush the
surface. Make sure the brush is clean
and that it is not pressed into the
openings.
IMPORTANT NOTICE
Use a soft, dry cloth to clean the hearing aid. The hearing aid must
never be washed or immersed in water or other liquids.
Microphone
openings
19