CIAT AirControl CTA Manuel De Régulation page 127

Use the mouse to select the regulator which must be configured, and by means of the right click to select "to Download" (or in the
menu Programming, select "Download").
Select "to Download the individual address" to activate the procedure of configuration and press the button of the card. The green
LED on the card goes out to indicate when the operation is ended. If the address of the card was configured already, the message
"Tea address is already used by another device" is posted.
5.5.3 3 Downloading the XML file
You must ensure that:
. the Bus wire network is drawn out and connected
. the Bus is energised
. the KNX board is connected to the network
. the controller is powered on
On ETS5, use the mouse to select the controller which needs to be configured, select the "parameters" tab and click "open the
dialogue box for parameters specific to the product".
EN - 61
EN