CIAT AirControl CTA Manuel De Régulation page 117

On request, the "Air_Technologies_110905.XIF" file is available.
5.4.1 LON scope of supply
Recap of on-site LON tasks by CIAT/Installer/Integrator for commissioning:
Task
Commissioning service
Supply of .XIF integration file
Installation of units equipped with LON controller
Addressing and configuration of LON network
Definition of master/slave zones
Definition of setpoints and time programs
5.4.2 Digital variables
Type Index
DGT 1
DGT 1
DGT --
DGT --
NV name SNVT
nvi_GTC_OnOff 95
nvo_GTC_OnOff 95
nvo_entree_dig_1 83
nvo_sortie_dig_1 83
CIAT Integrator
Direction
input Unit On/Off command via CMS
output Unit On/Off control return via CMS
output State of digital inputs
bit 0 Not used
bit 1 Heat pump unit control state
bit 2 Supply air fan control state
bit 3 Frost protection thermostat control state
bit 4 Damper end of travel state
bit 5 Fire sensor state
bit 6 Electric heater thermostat sensor input
bit 7 Remote control state
bit 8 Return air fan control state
Burner control state
bit 9
bit 10 Burner fault state
bit 11 Overheating fault state
bit 12 State control or rotary heat recovery pump
Brine recovery
output State of digital outputs
bit 0 Danger fault output
bit 1 Maintenance fault output
bit 2 Supply air fan control
bit 3 Return air fan control
bit 4 Damper control
bit 5 Electric heater stage 1 control
bit 6 Electric heater stage 2 control
bit 7 Electric heater stage 3 control
bit 8 Burner commissioning control
bit 9 Burner stage 1 control
bit 10 Burner stage 2 control
bit 11 Motor control of rotary heat recovery constant speed pump or
brine recoveryl
EN - 51
Installer
Description
EN