Internal Connectors
I/O Controller
Hardware Monitor
Form Factor
BIOS Features
6
Specifications
Continued from previous page
1x 24-pin ATX 12V power connector
y
1x 8-pin ATX 12V power connector
y
6x SATA 6Gb/s connectors
y
2x USB 2.0 connectors (support additional 4 USB 2.0 ports)
y
2x USB 3.1 Gen1 connectors (support additional 4 USB 3.1
y
Gen1 ports)
1x 4-pin CPU fan connector
y
1x 4-pin PUMP fan connector (supports up to 2A)
y
4x 4-pin system fan connectors
y
1x RGB LED connector
y
1x TPM module connector
y
1x Serial port connector
y
1x Parallel port connector
y
1x Front panel audio connector
y
2x System panel connectors
y
1x Chassis Intrusion connector
y
1x Clear CMOS jumper
y
NUVOTON NCT6795D Controller Chip
CPU/System temperature detection
y
CPU/System fan speed detection
y
CPU/System fan speed control
y
ATX Form Factor
y
12 in. x 9.6 in. (30.4 cm x 24.3 cm)
y
1x 128 Mb flash
y
UEFI AMI BIOS
y
ACPI 5.0, PnP 1.0a, SM BIOS 2.8
y
Multi-language
y
Continued on next page