External Device; Listening To An External Device - JVC RV-NB75B Instructions

External device

Listening to an external device

1
Set the volume level of the System to
minimum.
2
Connect the external device.
Refer also to the instruction manual for the
external device.
Stereo mini
Digital audio player, TV, or
plug cord
other audio device
(not supplied)
3
Press [AUDIO IN] to select "AUDIO IN".
Remote control
4
Start playback of the external device.
5
Adjust the volume of the System and of
the external device.
24
Headphone jack and
audio output jack
Main unit
Adjusting the audio input level
Adjust the audio input level when there is a contrast
between the volume of the external device
connected to the AUDIO IN jack and that of other
sources.
When "AUDIO IN" is selected as the source,
press [SET].
Each time you press the button, the input level
changes as follows:
"LEVEL1" Æ "LEVEL2" Æ "LEVEL3" Æ (back to
the beginning)
"LEVEL1" : Standard audio input level
"LEVEL2" : Higher level than "LEVEL1"
"LEVEL3" : Higher level than "LEVEL2"
The initial setting is "LEVEL3".