Table des Matières
Publicité
Wired Controller XK46
Start up Save function for Heating: When the unit is off, simultaneously press
"TIMER" and " " buttons for 5s, the buzzer will give out a sound and then unit will
enter into Save setting mode.
on. Press "MODE" button to switch to Heating or 3D Heating or Space Heating
mode. Press "
Press "ENTER/CANCEL" button to start up Save function.
After starting up save function, it will display "
and off status.
Cancel save function:
When the unit is off, press "TIMER" and " " buttons for 5s to enter into save
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Fig.4.14 Save Setting for Cooling in Fahrenheit
" icon is blinking. "MAX" icon and Mode icon are
" or " " button to adjust the temperature limit for Save function.
" icon for all modes under on
48
Publicité
Table des Matières
