STEINEL HL Stick Mode D'emploi page 6

Technical specifications
Voltage supply 230-240 V, 50 Hz
Output 350 W
1
Temperatures * 400 °C without nozzle
500 °C with 7 mm reduction nozzle (included)
Airflow rate 100 l / min. max.
Mains power cord H05
Protection class II
Emission sound pressure level ≤ 70 dB(A)
Total vibration value ≤ 2.5 m/s 2 I K = 0.08 m/s
Weight 0.7 kg
* 1 Temperature profile
Distance from outlet nozzle 20 mm 30 mm
Temperature without nozzle 360 °C 320 °C
Temperature with nozzle 450 °C 350 °C
Tool features
1 Stainless steel outlet nozzle
2
Air inlet
3 ON/OFF slide switch
4 Hanging ring
For your safety

Tool description - Operation
Operation
3
The tool is switched ON and OFF at the slide switch.
The distance from the object you are working on depends
on material and intended method of working. Always try out
temperature on a test piece first. Using the attachable noz-
zles (see accessories page on the cover) the flow of hot air
can be controlled with maximum precision.
Hanging ring
The integrated ring can be 4
for hanging the tool.
Note: max. pulling force = 150 N
2
40 mm 50 mm 100 mm 150 mm
280 °C 230 °C 150 °C 100 °C
290 °C 250 °C 150 °C 100 °C
5 Rubber sheathed cord
6 LED light for illuminating the work area
7 Standing surface
• The thermal cut-out shuts the tool down if it is overloaded.
• Attaching the reflector nozzle
C D
Take care when changing hot nozzles! When using the
hot air tool in the self-resting position, make sure it is stand-
ing on a stable, non-slip and clean surface.
LED light
used The LED is lit when 6 the tool is switched ON In addition
to illuminating the area you are working on, it also serves as
"tool ON" telltale light.
- 10 -
Uses
The hot air tool is ideal for use on smaller-type components
and shrink tubing. In particular, it has come to be appreci-
ated by model-makers and electronics technicians.
Here are just some of its many uses:
Heat-shrinking
• Shrink-fitting connectors for cables
and wires
• Fitting heat-shrinkable products
Shaping
• Work on plastic parts, e.g. in
model-making
200 mm
75 °C
75 °C
Accessories
Your retailer keeps a stock of these accessory nozzles
A Reduction nozzle 7 mm
Prod. No. 002886
Reduction nozzle with reflector guard
B
Prod. No. 077358
Declaration of Conformity
(see page 127)
Disposal
Electrical and electronic equipment, accessories and pack-
aging must be recycled in an environmentally compatible
manner.
Do not dispose of electrical and electronic equip-
ment as domestic waste.
Manufacturer's Warranty
This STEINEL product has been manufactured with utmost
care, tested for proper operation and safety and then sub-
jected to random sample inspection. Steinel guarantees
that it is in perfect condition and proper working order.
The product is guaranteed for 36 months or 500 hours
of operation commencing on the date of sale to the con-
sumer. We will remedy defects caused by material flaws or
manufacturing faults. The warranty will be met by repair or
replacement of the defective parts at our own discretion.
This guarantee does not cover damage to wearing parts,
damage or defects caused by improper treatment or main-
tenance nor does it cover breakage as a result of the prod-
Soldering / de-soldering
• Soldering SMD components
• Repairs and corrections to electronic
SMD assemblies
Drying
• Paints
• Plastics
C Reflector nozzle 40 mm
Prod. No. 077655
D
Reflector nozzle 10 mm
Prod. No. 077556
EU countries only:
Under the current European Directive on Waste Electrical
and Electronic Equipment and its implementation in national
law, electrical and electronic equipment no longer suitable
for use must be collected separately and recycled in an envi-
ronmentally compatible manner.
uct being dropped. Further consequential damage to other
objects shall be excluded. Claims under the guarantee shall
only be accepted if the product is sent fully assembled and
well packed complete with sales slip or invoice (date of
purchase and dealer's stamp) to the appropriate Service
G B
Centre or handed in to the dealer within the first 6 months.
Repair service: Our customer service department will repair
any faults not covered by the warranty or occurring after
1 3
the warranty has expired. Please send
Y E A R
the product well packed to the Service
Centre.
MANUFACTURER'S
WARRANTY
- 11 -
Y E A R
MANUFACTURER'S
WARRANTY