Publicité
Les langues disponibles
Les langues disponibles
G:2 Place the microphone in the end of the tap as shown in the
picture.
G:3 Fold the protector tape and make sure that the microphone
is covered.
G:4 Press tighly to seal the protector tape.
G:5 The microphone is now ready to use.
SPARE PARTS AND ACCESSORIES
3M™ PELTOR™ HY68 SV Hygiene kit
Replaceable hygiene kit. Replace at least twice a year
to ensure constant attenuation, hygiene and comfort.
3M™ PELTOR™ HY80A Gel cushion hygiene kit
Replaceable hygiene kit. Replace at least twice a year
to ensure constant attenuation, hygiene and comfort.
3M™ PELTOR™ HY100A Single-use protectors
Single-use protector that is easy to fit to the ear cushions.
3M™ PELTOR™ MT73 Waterproof microphone
Waterproof dynamic speech microphone.
3M™ PELTOR™ M171/2 Windshield for microphone
3M™ PELTOR™ HYM1000 Microphone protector
Moisture- and wind-resistant tape that protects the speech
microphone.
3M™ PELTOR™ M60/2 Wind protection for the surrounding
microphones
FCC AND IC INFORMATION
This device complies with part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesirable operation.
This device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic Development
Canada's licence-exempt RSS(s). Operation is subject to the
following two conditions: This device may not cause interference.
This device must accept any interference, including interference that
may cause undesired operation of the device.
NOTE: This device has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This device
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference, which
can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
FP3849reva_6sidedcover_32sidedinsert_A5.indd 6
•
Reorient or relocate the receiving antenna.
•
Increase the separation distance between the two interfering
devices.
•
Consult 3M Technical Services.
CAN ICES-3 (B)/NMB-3(B)
WARRANTY AND LIMITATION OF LIABILITY
WARRANTY: In the event any 3M Personal Safety Division
product is found to be defective in material, workmanship, or not
in conformity with any express warranty for a specific purpose,
3M's only obligation and your exclusive remedy shall be at 3M's
option, to repair, replace or refund the purchase price of such
parts or products upon timely notification of the issue by you
and substantiation that the product has been stored, maintained
and used in accordance with 3M's written instructions.
EXCEPT WHERE PROHIBITED BY LAW, THIS WARRANTY
IS EXCLUSIVE AND IS IN LIEU OF ANY EXPRESS OR
IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE OR OTHER WARRANTY
OF QUALITY, OR THOSE ARISING FROM A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE, EXCEPT OF
TITLE AND AGAINST PATENT INFRINGEMENT. 3M has no
obligation under this warranty with respect to any product that
has failed due to inadequate or improper storage, handling, or
maintenance; failure to follow product instructions; or alteration
or damage to the product caused by accident, neglect, or
misuse.
LIMITATION OF LIABILITY: EXCEPT WHERE PROHIBITED BY
LAW, IN NO EVENT SHALL 3M BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
LOSS OR DAMAGES (INCLUDING LOST PROFITS) ARISING
FROM THIS PRODUCT, REGARDLESS OF THE LEGAL
THEORY ASSERTED. THE REMEDIES SET FORTH HEREIN
ARE EXCLUSIVE.
NO MODIFICATION: Modifications to this device shall not be
made without the written consent of 3M Company. Unauthorized
modifications may void the warranty and the user's authority to
operate the device.
NOTE:
•
Do not mix old and new batteries.
•
Do not mix alkaline, standard, or rechargeable batteries.
•
To properly dispose of the battery, follow local solid waste
disposal regulations.
•
Only use AAA non-rechargeable or NiMH rechargeable
(as applicable) batteries.
6
EN
2018-11-30 10:30:10
Publicité
