Télécharger Imprimer la page

Speck pumpen Eurostar Eco Touch-pro Fiche Technique page 15

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
EN
The pump has a permanently magnetic motor and is electronically protected against
overload.
Connecting external switch contacts
The pump has a 5-wire cable with open ends for external control. Assignment of the
cables to the individual speeds is as follows:
The cables must be connected potential free. Only switch the contacts
individually. Otherwise the desired speed is not activated.
Note
The motor speed is switched on using the manual button or external switch contacts.
The switch contacts and the assigned speed are activated.
If the pump starts from a standstill, it starts up in priming mode and subsequently with
the selected fixed speed.
04/2013
VG 766.2100.064
White
= n 3
Green
= n 2
Brown
= n 1
Red
= Stop
Black
= GND/common
GND
e.g. 3-channel
timer with
potential free
switch contacts
D90.04.228
15

Publicité

loading