8.
Press every button going up to the top floor, ensuring that the elevator stops at
every floor sequentially
9.
The Navigation box will continually flash orange as the elevator goes up
10. Once stopped at the floor, the Navigation box LED will remain a solid orange
colour
11.
After around 5-10 seconds you will then be able to progress to the next floor.
When moving, the LED will begin to flash orange again
12. This sequence should repeat till you have reached the top floor.
13. When at the top floor you will need to repeat your journey in reverse until you
reach the bottom floor
(1) Going Up
(2) Going Down
5