Publicité
Les langues disponibles
Les langues disponibles
Accessories
Our 10mm camera is supplied with
attachments such as mirror, hook and
magnet. Fit these by placing the fixing
point in the hole on the camera and
secure with the retaining cover.
Remove the protective film from the
mirror before use.
For our 8.5mm camera the attachments clip on and our 5.5mm and 8mm
inspection cameras are supplied only with a threaded mirror. To fit this
remove the thread protection cover and screw the mirror into place.
Always clean a mirror carefully with a soft cloth.
If you wish to connect your inspection camera
to a TV to display live images or recordings on
a larger screen you can connect it with a
3.5mm jack to video cable. This cable must be
the 3 connection type as shown here and
should be purchased separately.
Page No. 35 V1.1
Publicité
