i-tec USB-C 4K Guide D'instructions Et Mode D'emploi page 9

Click on Gather Windows: using this option you can choose the settings of the corresponding monitor –
Scaled (offers available resolutions), Rotation Sta da d,
Notes for using the docking station with monitors:
Working on the connected monitor when the Mac monitor is closed is possible with the power supply from
the grid (there are some limitations when using a HDMI monitor on older versions of Mac). When the
power supply is from the battery, the use of a HDMI monitor is limited by the Mac (in some situations in
case of problems with displaying it is possible to use the method described in the following paragraph).
Most problems with renewing the screen on the connected monitor after hibernation of the Mac, after
using screensaver, after restarting the Mac, after turning the Mac OFF / ON can be solved by disconnecting
the USB-C cable of the docking station from the USB-C port on the Mac and reconnecting it after
approximately 10 s. Please wait for completion of connection of all peripherals.
SAFETY INSTRUCTIONS

Do not expose to extreme temperatures and air humidity.
Use the device on flat surfaces – you will prevent it from slipping and falling to the ground.


Save the user manual for a possible use later.
In cooperation with the service department:

Check functionality after falling to water or to the ground.

Check functionality when the cover is broken.

Send the device back if it does not work in accordance with the user manual.
FREQUENTLY ASKED QUESTIONS
Question: What are the requirements for the primary graphic cards to be used with the graphic chipsets in
the i-tech graphic adapters and docking stations?
°, ° a d ° a d Refresh rate (if offered).