Removing And Replacing The Side Racks - Fisher & Paykel DCS RGU Guide D'utilisation

Care and cleaning
36
US
CA

Removing and replacing the side racks

To remove side racks
Remove any shelves first. See section
1
'Positioning the shelves' for instructions.
Swing the bottom of the side rack up
3
towards the center of the oven until it is
almost horizontal.
To replace side racks
Supporting the side rack with your hand
1
from underneath, hold it almost horizontally
and locate the prongs into the mounting
slots.
Retaining wire
Gently pull down on the retaining wire from
2
underneath the lock stud. The retaining wire
will pop out.
M o
u n t
Slide the prongs at the top out of the
4
mounting slots.
Ensure the prongs are fully inserted into the
2
slots, then lower the side rack carefully and
gently push the retaining wire underneath
the lock stud.
Lock stud
i n g
s l o t
s