Presentation Of Information; Notes On Safety - Aventics DDL Mode D'emploi

48 AVENTICS | DDL | R412009417–BDL–001–AD
About This Documentation
1.3

Presentation of information

To allow you to begin working with the product quickly and
safely, uniform safety instructions, symbols, terms, and
abbreviations are used in this documentation. For better
understanding, these are explained in the following sections.
1.3.1

Notes on Safety

This documentation contains safety instructions before any
steps that involve a risk of personal injury or damage to
equipment. The measures described to avoid these hazards
must be observed.
Safety instructions are set out as follows:
Hazard type and source
Consequences of non-observance
Precautions
O
Safety sign: draws attention to the hazard
W
Signal word: identifies the degree of hazard
W
Hazard type and source: identifies the hazard type and
W
source
Consequences: describes what occurs when the safety
W
instructions are not complied with
Precautions: states how the hazard can be avoided
W
Table 2: Hazard classes according to ANSI Z535.6-2006
Safety sign, signal word
CAUTION
NOTICE
SIGNAL WORD
Meaning
Indicates a hazardous situation
which, if not avoided, could result in
minor or moderate injury.
Indicates that damage may be
inflicted on the product or the
environment.