Publicité
Les langues disponibles
Les langues disponibles
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery release button (6), and pull
battery pack (5) out of tool.
TO INSTALL BATTERY PACK: Align rails on the tool with the four tabs on the
battery pack (5), and push battery pack (5) onto tool until it locks in place. (see Fig. 2)
SIDE-HANDLE
The side-handle (4) for your angle grinder can be fitted to either side of the gear case.
NOTE
The closed side of the guard (2) must always point towards the operator.
Remove the battery pack before performing any maintenance
Mounting the Guard
To fit the guard (2) for other applications, proceed as follows:
1. Place the guard (2) on the spindle collar of gearbox.
2. Clamp the guard (2) with the screws on the both sides.
3. The grinding disc must be able to rotate freely within the guard (2).
1English1
ASSEMBLY
OPERATION
English
-10
Publicité
