Facom E.516ST-30 Traduction De La Notice D'instructions Originale page 24

EngLIsH
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery with due care for
the environment.
Package Contents
The package contains:
1 Torque wrench
1 Ratchet accessory
1 USB cable
1 Charger
1 Declaration of conformance
1 Instruction manual
nOtE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by FACOM is under license. Other trademarks and
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Description (Fig. A)

WARNING: Never modify the tool. Damage or personal
injury could result.
Soft grip handle
1
Safety guard
2
Interchangeable ratchet accessory
3
Tightening status LED
4
OLED display
5
Multifunction button
6
BLE status LED
7
Wrench status
8
Haptic feedback
9
Charging pins
10
Charger
11
Micro USB cable
12
Charging dock
13
Intended Use
This is a manually operated torque wrench for use with
when tightening fasteners to meet the manufacturers
torque specification.
BLE communication and app control gives access to additional
functionality such as fast setting, programming sequences and
data recording.
DO nOt use under wet conditions or in the presence of
flammable liquids or gases.
This manually operated torque wrench is a professional
hand tool.
22
DO nOt let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
OPERATION
Download the FACOM Tools app from the app store.
Proper Hand Position (Fig. A)

WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.

WARNING: To reduce the risk of serious personal injury,
ALWAYS hold securely in anticipation of a sudden reaction.
Proper hand position requires one hand on the soft grip handle
Power ON/OFF (Fig. A)
1. To turn the wrench on and off, press the multi function
button 6 .
OLED display (Fig. F)
The OLED display shows the user the following important
wrench information.
- Pass indicator 14
Bolt indicator 15
-
- Battery level 16
- Actual torque 17
- Tightening direction
- Torque target 19
- GO (ready to work)
- Units 21
BLE 22
-
- Number of job in sequence
- Job index 24
Pairing Wrench with a Bluetooth® device (Fig. G)
1. Remove wrench for the charging dock.
nOtE : Connectivity will not function while the wrench
is charging.
2. Place the wrench and the Bluetooth device within 1 m of
each other.
3. Turn ON wrench with a short press of the multi function
button 6 .
nOtE : During power up, the wrench should be placed on a
flat surface to allow auto calibration of the internal gyro for
angle mode. The firmware version number will be displayed
during boot. Wait approx. 2-3 seconds until the orange
status light has stopped flashing and the main screen
is displayed.
18
20
23
1 .