4 Filters
4.2 Replacing the blow-out
filter
2
1
2
1
28
1. Switch the appliance off and observe the instructions
under ZChapter 3.2, "Switching off and retracting the
power cable".
2. Open the blow-out filter cover (Fig. 24/1). To do this,
press the lock (Fig. 24/2) down and pull the blow-out
filter cover back.
Fig.24
3. Pull the filter holder (Fig. 25/1) out of the back and
remove the filter (Fig. 25/2).
4. Insert the new filter into the filter holder (Order Number,
ZChapter 8, "Spare parts").
NOTE:
If it is only slightly dirty, it can also suffice to knock the
filter over a dustbin. However, we recommend you
Fig.25
replace the filter regularly.
5. Then reinsert the filter holder and blow-out filter cover
again.