CAN FL Serie Manuel D'instructions, D'installation, D'utilisation Et D'entretien page 59

TROUBLESHOOTING AFTER INSTALLATION
If the appliance does not work properly after installation, perform the controls in the table.
problem
The gas flow
seems irregular
If the appliance still does not work properly after all the checks have been made, contact the
authorised local dealer.
ATTENTION!
Install the appliance by following the instructions contained in this manual. Non-compliant
installation can lead to inconveniences, failures, damage and serious hazards for the installer
and the user.
Check that the gas cock is completely open.
Check that the fuel supply circuit has appropriate flow rate.
Check that the burner spreaders and relative caps are positioned correctly and free
from obstructions.
Check that the nozzles are suitable for the type of gas used.
Check compatibility and the correct calibration of the pressure regulator, if included.
Check the gas supply pipe (pipe obstructed, bent/crushed, excessively long,
unsuitable, etc.).
Installation, use and maintenance instruction manual
possible solutions
▪
Ed. 02/2019 Rev. 01
59