Switching The Playback Information Display - Yamaha MCS-1330 Mode D'emploi

Switching the playback information display

You can switch the disc playback information shown in the CD player's front panel display. Available information
differs depending on the type of the disc/USB device.
DISPLAY DIMMER
DISPLAY
PURE DIRECT
■ Playback information for audio CDs
The following information is available during playback of an audio CD.
1
Elapsed time of the current track
2
Remaining time of the disc
■ Playback information for MP3 or WMA files recorded on discs/USB devices
1
Elapsed time of the current file
2
File name
VOL
TONE BALANCE
SLEEP
MUTE
Press DISPLAY repeatedly while playing back a
disc/USB device.
Each time you press the key, the information display
changes as described in "Playback information for audio
CDs" and "Playback information for MP3 or WMA files
recorded on discs/USB devices".
Note
Some special characters may not be shown properly.
Returns to the normal display after displaying a file name.
DISC AND USB DEVICE OPERATIONS
15
En