Operation; Switching On - Leica DM5500 B Manuel D'utilisation

8. Operation

8. Operation

8.1 Switching on

When using a gas discharge lamp, the ebq 100
external supply unit must be turned on sepa-
rately (63b.1).
The external light source Leica EL6000 (if used)
also has to be switched on at the power switch
(63c.1).
Switch on the Leica CTR5500 or CTR6000
Electronics Box at the on/off switch (63a.1).
When in operation, the pilot lamp will light up
green (63a.2).
Note:
If you have connected a PC, please switch on
the electronics box first and the computer after-
wards.
Fig. 63b Front view of the ebq 100 supply unit
1 Power switch
2 Lamp status
1
60
2
All motorized components will run through an
initializing phase.
Fig. 63a
Front view of the
Leica CTR6000 box
1 On/off switch
2 Pilot lamp
Fig. 63c Front side of Leica EL6000 compact light source
1 Power switch
2 Intensity control
1
2
1
2