Leica DM1000 Mode D'emploi page 23

• Insert the lamp mount, with the burner in-
stalled, into the lamp housing and tighten it
with the screws (15.8)
• Close the lamp housing and retighten the
screws
• Place the lamp housing in the incident light
lamp housing receptacle (17.1) and fasten it
with the clamping screw on the side
• Connect the lamp housing to the external
power supply
Fig. 16 a-c Lamp mounts for gas discharge lamps
1 Upper clamping system
2 Lower clamping system
3 Cooling element
4 Nipple of the mercury 50 burner,
5 Dust cover of the mercury 75 burner
Xe 75
1
2
Fig. 17 Mounting the 106z lamp housing
1 Lamp housing receptacle
Hg 50
1
4
Hg 100
b
3
1
5
2
6. Assembly
1
a
3
2
c
3
23