LEM SATURN 100 plus Manuel D'utilisation page 50

Information for the tester
Phase Connection Test
The voltage of the „L" and „N" wires is measured with respect to „PE", evaluated in
the processor and displayed as a phase shift, using the symbol „
CAUTION: It must not be assumed that there is no danger in touching the
other wire! The display refers to the larger voltage.
No assignment is possible in position L-N.
In combination with the display of the insulation resistance R
indicates the permanently assigned L wire!
Stand-By Mode
After approx. 45 s have elapsed without any operations (keys, central selector), the
instrument goes into stand-by mode automatically. This switching-off serves to
keep down current consumption. „ --- " appears on the display. All measured
values which appeared before can be recorded with the „DISPLAY" key.
"
, the above symbol
ISO
48