2.1
DISPLAY MENU
Description
Access this menu to screen settings.
Position the "Active Frame" on the "DISPLAY" icon and press "ENTER".
The following window will appear:
This page contains the basic menu settings.
The selected item is highlighted.
Press arrows "◄►▲▼" to point the cursor to the various menu items.
Point the cursor to the required item and press "ENTER" to e
selected menu item.
Select "CONFIRM" and press "ENTE
Select "CANCEL" and press "ENTER" to cancel the changes.
Press "ES " to go back by one step.
C
Press "
ESC" several times until the configuration window closes to quit the configuration menu.
2.1.1
DISPLAY MENU BASIC SETTINGS
2.1.1.1
Language
Use "▲
▼" to select the language in this menu.
2.1.1.2
Device
ID
This opt
ion can be used to assign an address to the DVR for controlling it with a remote control.
Define a dif
ferent address for each device if several DVRs are installed, otherwise the remote con
the same address at the same time.
The default address is "01".
Use keys 0÷
9 on the front panel to edit the device ID address.
The address must be from 1÷255.
2.1.1.3
Require password
This option can be used to enable or disenable password request for the following functions:
Menu
This function enables/disenables password request when the configuration menu is accessed.
PLAYBACK
This function enables/disenables password request when playback is started/stopped.
RECORDING
This function enables/disenables password request when recording is started/stopped.
PTZ
This function enables/disenables password request when the PTZ menu is accessed.
Press "ENTER" or "EDIT" to enable or disenable the password.
Symbol " " indicates that a password is required; symbol "×" indicates that a password is not required. The password is enabled
by default.
DS1093-022
Figure 23: display menu
R" to make the changes effective.
dit it. Use buttons "▲▼" to change the available options for the
35
trol will control all DVRs with