Display Window - OHAUS Catapult 1000 Serie Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN-2
Button
Primary Function
(Short Press)
Secondary
Function
(Long Press)

1.2 Display Window

1.2.1 Large 7-Segment Numeric Characters:
Weight (mass) values are shown using 4 digits including negative sign and decimal
places. Prompts for calibration and possible error conditions are also shown using
these digits.
1.2.2 Stable Reading Indication:
A * will appear in the lower left corner of the display to indicate when the reading is
stable.
1.2.3 Weighing Unit Indication:
The weighing unit selected appears on the right side of the display
1.2.3 Dynamic Weighing Mode Indication:
A • will flash next to the selected unit during this mode.
1.2.3 Low Battery Indication:
The battery symbol on the left side of the display
condition. When first displayed, approximately 12 hours of operation remain.
When the battery is fully depleted, the scale will momentarily display "Lo bAt" and
shut off.
TABLE 1-1. CONTROL FUNCTIONS.
On/Zero
Off
ON/ZERO
Turns scale ON.
If scale is On:
Sets zero.
Simulates a tare operation.
Off
Turns scale off.
Catapult 1000 Series Scales
Units
Cal
UNITS
Changes the weighing unit.
Enters Dynamic Weighing
Mode.
Initiates countdown in
Dynamic Weighing mode.
Cal
Initiates calibration process.
indicates a low battery

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Catapult c11p9Catapult c11p20Catapult c11p75C11p9C11p20C11p75

Table des Matières