Base Plate - RIB NORMAL Mode D'emploi

OPTIONALS -
T
ELESCOPIC OCTAGONAL BOOM ARM, 6 m
Telescopic octagonal boom arm and fixing hub L = 3 + 3 m.
H
ANGING RACK
L = 2 m
L = 3 m
WARNING: Not to use in windy areas.
N.B. It is obligatory to install an Hanging support ACG8285 or one Fork
type support column ACG9130.
Ø
100 mm BOOM ARM
Ø 100 mm boom arm thickness 2 mm need fixing hub L = 6 m.
NOTE: when ordering, the special balance springs should be required
(CME8100 for balance spring Ø 5,5 and CME8068 for balance
spring Ø 6).
L = 6 m
ACG8497
S
TICKERS FOR OCTAGONAL BOOM ARMS
12 pieces.
For the connections and the technical data of the fixtures follow the relevant handbooks.
code ACG8513
code ACG8290
code ACG8291
code ACG8497
Boom 0 cm
code ACG8527
T
ELESCOPIC OCTAGONAL BOOM ARM, 7 m
Telescopic octagonal boom arm and fixing hub L = 4 + 3 m.
F
IXING HUB
Fixing hub for octagonal boom arm
Fixing hub for telescopic octagonal boom arm
F
IXING HUB
Fixing hub for ø 100 mm boom arm.
B
ASE PLATE

Base plate.

S
TICKERS FOR Ø 100 BOOM ARM
12 pieces.
G
B
code ACG8514
code ACG8563
code ACG8564
code ACG8539
code ACG8110
code ACG8526